Xn Patented Product 126213-50-1 50kgs/iron Drum With Plastic Lining

Xn Patented Product 126213-50-1 50kgs/iron Drum With Plastic Lining

Chemical Product and Company Identification

Name: 3,4-ethylenedioxy thiophene, 99.90+%

Synonyms: 2,3-Dihydrothieno[3,4-b]-1,4-dioxin; EDT; 

Company Identification:Beili Chemicals (Zhangjiagang) Co., Ltd.

Composition, Information on Ingredients

Substance: 3,4-ethylenedioxy thiophene

% content: 99.90+

CAS Number: 126213-50-1

EINECS:/

Hazard Symbols: Xn

Risk Phrases:/

Specification

Handling and Storage

Handling: Directions for Safe Handling: Do not breathe vapor. Avoid contact with eyes, skin, and clothing. Avoid prolonged or repeated exposure.

Storage: Conditions of Storage: Store in a cool dry place.Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage.

Recommended storage temperature: 2 - 8 °C

Exposure Controls, Personal Protection

Engineering Controls: Use only in a chemical fume hood. Safety shower and eye bath.

Personal Protective Equipment

Eyes: Wear chemical goggles. Wear safety glasses and chemical goggles if splashing is possible.

Skin: Wear appropriate protective gloves and clothing to prevent skin exposure.

Clothing: Wear appropriate protective clothing to minimize contact with skin.

Respirators: A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use. Wear a NIOSH/MSHA or European Standard EN 149 approved full-facepiece airline respirator in the positive pressure mode with emergency escape provisions.

3,4-ethylenedioxythiophene  Application

1. the application in solid electrolytic capacitor

The electrolytic capacitor using PEDT as the negative pole is called solid conductive polymer capacitor. Its conductivity is 100S / CM, which is 100 times of TCNQ salt, 10,000 times of electrolyte.The security of solid conductive polymer capacitor is better, when it is in the high Temperature, the electrolyte is just melting but can not explode.

Compared with the traditional manganese dioxide solid electrolytic transistor electrode, the solid electrolytic capacitor electrode made by PEDT has the following characteristic.

2.the application in Antistatic coating

Antistatic coating is the most important application of PEDT. Compared with other conductive polymer, PEDT/PSS film is not easy to hydrolysis, and it is light fastness and is against high temperature. This kind of characteristic just satisfy the request of anti- static coating. In addition, the resistance of PEDT coating may reach 200 ~ 107 Omega /m2.Therefore, the anti-static coating mixed with PEDT has great potential development

3.the super material of capacitor electrode

PEDT as a new type of storage capacitor materials. The present experimental data indicate that the capacity of super capacitor using PEDT as electrode can achieve 3000 F. Recent research has concentrated on improving the polymer discharge performance, cycle life and thermal stability and so on.

4.The basic material of organic electroluminescence (OEL) display technology

Organic electroluminescence (OEL) display technology is a quite hot topic in recent years. PEDT can be as the hole injection layer of PLED, also can replace indium oxide or Tin oxide(ITO) conductive layer, therefore PEDT is the most important polymers of PLED technology in the future.

5.Other application

Moreover, as the fine characteristics of PEDT, it has broad applying prospects in Via PCB coating, sensors, rechargeable batteries, photodiode, corrosion protection.

PEDT and its derivatives are kinds of the polymer with good conductivity and high stability, It has been successfully applied in solid capacitors, antistatic coatings, organic electroluminescence and many other electronics industry area in recent years. It brought to the rapid development of conductive polymer, representing the development trend of conductive polymers. It has become the most important material of electronics and information industry now.

 Storage condition

Store in a cool dry place.Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage.

Recommended storage temperature: 2 - 8 °C

 Safety terms

Avoid contact with skin and eyes. Wear suitable protective clothing.

Packaging Specifications

Typical bulk packaging includes 50kgs/iron drum with plastic lining,also can be packaged according to customer requirements. Excellence in product packaging will be a good protection for products, reducing the damage in the transport process to ensure that products safely reach our customers.

BeiLi is a leading manufacturer of 3,4-ethylenedioxythiophene(EDOT) 126213-50-1 which has the patented technology for producing high quality EDOT. We can provide our customers with quality 3,4-ethylenedioxythiophene(EDOT) 126213-50-1. Regarding purity and the quantity you require, these two factors may affect the price. If you require any further information about 3,4-ethylenedioxythiophene(EDOT) 126213-50-1, please do not hesitate to contact our experienced staff.